NSN 5340-01-048-3079 · NIIN 010483079 · FSC 5340
NO DASHES 5340010483079
In Stock
CLIP,SPRING TENSION
Hardware, Commercial
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABGL | WIDTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.470 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.009 AND INCHES MAXIMUM 0.015 |
| ABRY | LENGTH | INCHES MINIMUM 0.380 AND INCHES MAXIMUM 0.420 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AZWE | DISTANCE FROM LOOP CENTER TO END | INCHES MINIMUM 0.217 AND INCHES MAXIMUM 0.237 |
| CJYS | LOOP/HOLDING DIMENSION | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST- A682 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M24066/2-308 | 80205 |
| NASM24066/2 | 80205 |
| NASM24066/2-308 | 80205 |
| M24066/2-108 | 81349 |
| MIL-C-24066/2 | 81349 |
| M24066/2-308 | 81349 |
| 6010-5A | 91506 |
| MS24066/2-308 | A0126 |
| 416949-8 | D9182 |
| DX514768PC4 | 08241 |
| DX514768PC4 | 14418 |
Supersedes
This item replaces cancelled NIIN 009593041. An older drawing citing one of those numbers resolves here.