NSN 5340-01-049-6353 · NIIN 010496353 · FSC 5340
NO DASHES 5340010496353
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.610 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.198 AND INCHES MAXIMUM 0.213 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.085 AND INCHES MAXIMUM 0.130 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.275 AND INCHES MAXIMUM 1.325 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.585 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.730 AND INCHES MAXIMUM 1.770 |
| MATT | MATERIAL | OVERALL PLASTIC POLYHEXAMETHYLENE AMIDE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST- D4066 |
| STYL | STYLE DESIGNATOR |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS23190 | 81343 |
| AS25281 | 81343 |
| MS25281R28 | 96906 |
| 10117574 | A486G |
| MS25281-R28 | D9182 |
| MS25281-R28 | 0U583 |
| AS25281 | 0U583 |
| SAE-AS25281 | 0U583 |
| AS23190 | 0U583 |