NSN 5340-01-059-2450 · NIIN 010592450 · FSC 5340
NO DASHES 5340010592450
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.0295 AND INCHES MAXIMUM 0.0345 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.360 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.548 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.140 |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,ALCLAD T4 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AN742D2 | 58536 |
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| 5340PL1820270 | 9009H |
| 5340PL0846610 | 9009H |
| MS21103D2 | 96906 |