NSN 5340-01-063-3936 · NIIN 010633936 · FSC 5340
NO DASHES 5340010633936
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.062 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.203 AND INCHES MAXIMUM 1.233 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.436 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.423 AND INCHES MAXIMUM 1.453 |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 |
| SFTT | SURFACE TREATMENT | BAND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21919WDG23 | 1X015 |
| MS21919WDG23 | 3LRU1 |
| AS21919WDG23 | 81343 |
| 5340PL0847209 | 9009H |
| MS21919WDG23 | 96906 |
| 10117581 | A486G |
| MS21919DG23 | D9182 |
| MS21919WDG23 | 9X754 |
| AS21919WDG23 | 0U583 |
| SAE-AS21919 | 0U583 |
Supersedes
This item replaces cancelled NIINs 002213021 · 005876681 · 005762157 · 010447977. An older drawing citing one of those numbers resolves here.