NSN 5340-01-071-6613 · NIIN 010716613 · FSC 5340
NO DASHES 5340010716613
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL, AROMATIC AND HEAT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.625 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.173 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.051 |
| AHMM | LUG WIDTH | INCHES NOMINAL 0.500 |
| AXWJ | FASTENING DEVICE TYPE | LUG |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.781 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.031 |
| AZDE | CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE | INCHES NOMINAL 0.828 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| BZTQ | LUG HOLE DIAMETER | INCHES NOMINAL 0.173 |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | CUSHION RUBBER SYNTHETIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 4TE-ERT4 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 739-12 | 83930 |