NSN 5340-01-089-9353 · NIIN 010899353 · FSC 5340
NO DASHES 5340010899353
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.558 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.776 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.312 |
| MATT | MATERIAL | CUSHION PLASTIC POLYTETRAFLUOROETHYLENE AND ASBESTOS |
| MATT | MATERIAL | BAND STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6721 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| TA716H5A | 84971 |
| 490-5 | 83930 |
| 4000-05 | 98500 |
| 2005 | 98500 |
| 211-536-9105 | 99193 |