NSN 5340-01-103-2169 · NIIN 011032169 · FSC 5340
NO DASHES 5340011032169
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.128 AND INCHES MAXIMUM 0.133 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.055 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.511 AND INCHES MAXIMUM 0.573 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.698 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.500 |
| MATT | MATERIAL | BAND PLASTIC POLYAMIDE NYLON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MFR REF SINGLE MATERIAL RESPONSE ZYTEL 101,E I DUONT DE NE-OURS AND CO INC |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 211-008-9119 | 70210 |
| 1-2 4-128 | 85480 |
| 1/2-4-.128 | 85480 |
| 10018730-025 | 18876 |
Supersedes
This item replaces cancelled NIIN 008460875. An older drawing citing one of those numbers resolves here.