NSN 5340-01-105-6679 · NIIN 011056679 · FSC 5340
NO DASHES 5340011056679
In Stock
BRACKET,ANGLE
Hardware, Commercial
Application: W/S: AIRCRAFT, HARRIER AV-8B; AIRCRAFT, EAGLE F-15; AIRCRAFT, HORNET F/A-18; F/A-18E/F HORNET AIRCRAFT; AVIATION ORDANCE; GUN SYSTEM, 25MM
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.750 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.750 |
| AGAV | END ITEM IDENTIFICATION | W/S: AIRCRAFT, HARRIER AV-8B; AIRCRAFT, EAGLE F-15; AIRCRAFT, HORNET F/A-18; F/A-18E/F HORNET AIRCRAFT; AVIATION ORDANCE; GUN SYSTEM, 25MM |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.980 AND INCHES MAXIMUM 1.020 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.129 AND INCHES MAXIMUM 0.134 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.230 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.250 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.050 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.050 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.980 AND INCHES MAXIMUM 1.020 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,T81 |
| SFTT | SURFACE TREATMENT | PAINT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL--23377 |
| STYL | STYLE DESIGNATOR |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST9M580C1R | 59570 |
| ST9M580-102 | 76301 |
| ST9M580C1R | 76301 |
| ST9M580AC1R | 76301 |
| ST9M580C1LW | 76301 |
| ST9M580C15 | 76301 |
| ST9M580-103 | 76301 |
| 10117638 | A486G |
| ST9M580-103 | 04967 |
| ST9M580C1R | 04967 |