NSN 5340-01-106-2735 · NIIN 011062735 · FSC 5340
NO DASHES 5340011062735
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND OIL RESISTANT AND WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.0285 AND INCHES MAXIMUM 0.0355 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.046 AND INCHES MAXIMUM 1.076 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 1.264 AND INCHES MAXIMUM 1.294 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.173 AND INCHES MAXIMUM 1.203 |
| MATT | MATERIAL | CUSHION RUBBER |
| MATT | MATERIAL | BAND STEEL COMP 321 OR STEEL COMP 347 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MIL SPEC SINGLE MATERIAL RESPONSE -IL-R-25988 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21919WCJ19 | 1CQA5 |
| AS21919WCJ19 | 2Y159 |
| AS21919WCJ19 | 81343 |
| MS21105-19 | 96906 |
| MS21919WCJ19 | 96906 |
| 9463105619 | S4080 |
| SAE-AS21919 | 0U583 |
| AS21919WCJ19 | 0U583 |