NSN 5340-01-112-3532 · NIIN 011123532 · FSC 5340
NO DASHES 5340011123532
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.062 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 1.312 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.530 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.610 AND INCHES MAXIMUM 1.640 |
| MATT | MATERIAL | CUSHION RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3215 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC28WD26 | 22175 |
| ST9M588WDF26 | 76301 |
| ST9M588WDG26 | 76301 |
| AS21919WDF26 | 81343 |
| 815WD26 | 83930 |
| 815WD26NB | 83930 |
| MS21919WDF26 | 96906 |
| 10388393 | A486G |
| 90601604 | U4338 |
| SAE-AS21919 | 0U583 |
| AS21919WDF26 | 0U583 |
| S663WDG26 | 18076 |
Supersedes
This item replaces cancelled NIIN 012237794. An older drawing citing one of those numbers resolves here.