NSN 5340-01-123-1554 · NIIN 011231554 · FSC 5340
NO DASHES 5340011231554
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND HYDRAULIC FLUID |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.034 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.883 AND INCHES MAXIMUM 0.913 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.116 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.875 |
| FEAT | SPECIAL FEATURES | OZONE RESISTANT |
| MATT | MATERIAL | BAND STEEL COMP 631 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-25043 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC70WPH14YN | 22175 |
| 9M972-14N | 22175 |
| 9M972-14N | 76301 |
| SS7563-14NBC | 78286 |
| M85052/1-14 | 81349 |
| MIL-C-85052/1 | 81349 |
| MIL-DTL-85052/1 | 81349 |
| TA026000114NB | 84971 |
| TA026-0001-14N | 84971 |
| 1444PHW14Y | 83930 |
| 058527-06 | 89305 |
| 5340PL1694610 | 9009H |
| 10112428 | A486G |
| S664NB14 | 18076 |