NSN 5340-01-125-9077 · NIIN 011259077 · FSC 5340
NO DASHES 5340011259077
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND HYDRAULIC FLUID |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.018 AND INCHES MAXIMUM 0.022 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.546 AND INCHES MAXIMUM 0.576 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.779 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.312 |
| FEAT | SPECIAL FEATURES | CUSHION ALSO OZONE RESISTANT |
| MATT | MATERIAL | CUSHION RUBBER SYNTHETIC |
| MATT | MATERIAL | BAND STEEL COMP 631 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-25043 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
19 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC70WPH5YN | 22175 |
| S664NB5 | 22175 |
| JM44LC70PH5YN | 22175 |
| JM44LC70PH6YN | 22175 |
| 1444PHW5Y | 76301 |
| ST2439-05 | 77445 |
| 9M972-5N | 76301 |
| SS7563-5NBC | 78286 |
| MIL-DTL-85052 | 81349 |
| MIL-C-85052/1 | 81349 |
| M85052/1-5 | 81349 |
| MIL-DTL-85052/1 | 81349 |
| TA026000105NB | 84971 |
| 144PH5Y | 83930 |
| 1444PHW5Y | 83930 |
| 5340PL0726145 | 9009H |
| 10112490 | A486G |
| S664NB5 | 18076 |
| S664HT5 | 18076 |
Supersedes
This item replaces cancelled NIIN 016672091. An older drawing citing one of those numbers resolves here.