NSN 5340-01-126-9812 · NIIN 011269812 · FSC 5340
NO DASHES 5340011269812
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND FUEL RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.037 AND INCHES MAXIMUM 0.043 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.143 AND INCHES MAXIMUM 1.173 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.376 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 1.375 |
| MATT | MATERIAL | BAND STEEL COMP 631 |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE MATERIAL RESPONSE -IL-C-25043 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MFR REF SINGLE MATERIAL RESPONSE TA88-50 FSC- 84971 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 9M972-22S | 22175 |
| MIL-DTL-85052/3 | 81349 |
| MIL-C-85052/3 | 81349 |
| M85052/3-22 | 81349 |
| TA026000122HC | 84971 |
| 10112508 | A486G |
Supersedes
This item replaces cancelled NIIN 014489471. An older drawing citing one of those numbers resolves here.