NSN 5340-01-133-5308 · NIIN 011335308 · FSC 5340
NO DASHES 5340011335308
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Application: 2350-01-091-5405 CARRIER MLRS; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 4.560 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.310 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-091-5405 CARRIER MLRS; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 10.130 |
| AHLH | SECOND LEG END WIDTH | INCHES NOMINAL 9.750 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 8.620 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.750 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.500 |
| AHLZ | SECOND LEG SLOT LENGTH | INCHES NOMINAL 0.750 |
| AHMA | SECOND LEG SLOT WIDTH | INCHES NOMINAL 0.438 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.125 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.125 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 1.620 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 10.130 |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.125 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 10.130 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 90.0 |
| CWMX | FIRST LEG CUTOUT LENGTH | INCHES NOMINAL 0.750 |
| CWMZ | FIRST LEG CUTOUT WIDTH | INCHES NOMINAL 1.380 |
| CWPG | SECOND LEG CHAMFER ANGLE | DEGREES MINIMUM 45.0 AND DEGREES MAXIMUM 90.0 |
| FEAT | SPECIAL FEATURES | BOTH BOTTOM CORNERS ARE CUT AT 45 DEGREE TO 0.380 IN. |
| MATT | MATERIAL | ALUMINUM ALLOY 5086 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 7 AND FED SPEC 2ND MATERIAL RESPONSE QQ-A-250 TO 6 |
| STYL | STYLE DESIGNATOR |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12299627 | 19207 |
| 12299627-15 | 19207 |
| 10393105 | A486G |