NSN 5340-01-139-4429 · NIIN 011394429 · FSC 5340
NO DASHES 5340011394429
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.077 AND INCHES MAXIMUM 1.107 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.310 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.235 AND INCHES MAXIMUM 1.265 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MATT | MATERIAL | BAND STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| SFTT | SURFACE TREATMENT | BAND CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TYE 1 CLASS 2 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| AN742-22C | 88044 |
| 5340PL0802797 | 9009H |
| MS21919G20 | 96906 |
| MS21919WG20 | 96906 |
Supersedes
This item replaces cancelled NIIN 005984131. An older drawing citing one of those numbers resolves here.