NSN 5340-01-142-4469 · NIIN 011424469 · FSC 5340
NO DASHES 5340011424469
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.375 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.0285 AND INCHES MAXIMUM 0.0355 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.592 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.780 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| FEAT | SPECIAL FEATURES | CUSHION COLOR WHITE |
| MATT | MATERIAL | BAND STEEL COMP 302 OR STEEL COMP 321 |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5059 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5510 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3303 |
| STYL | STYLE DESIGNATOR |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 09A067WD06R | 1W025 |
| JM44LC336WD6R | 22175 |
| AS21919WCH6 | 81343 |
| M23190/2-6A | 81349 |
| MIL-S-23190/2 | 81349 |
| TA025035WDC06HW | 84971 |
| 815WD6R | 83930 |
| 5340PL1660466 | 9009H |
| MS21919DH6 | 96906 |
| MS21919WDH6 | 96906 |
| MS21919WCH6 | 96906 |
| MS21919CH6 | 96906 |
| AS21919WCH6 | K0668 |
| AS21919WCH6 | 0U583 |
| SAE-AS21919 | 0U583 |
Supersedes
This item replaces cancelled NIIN 013572395. An older drawing citing one of those numbers resolves here.