NSN 5340-01-153-1429 · NIIN 011531429 · FSC 5340
NO DASHES 5340011531429
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | THREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 2.920 AND INCHES MAXIMUM 3.020 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.026 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 3.530 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 5.000 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.438 |
| FEAT | SPECIAL FEATURES | FURNISHED WITH FORCE BAR AND REACTION BLOCK |
| MATT | MATERIAL | BOLT STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1040 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1039 OR STEEL COMP 1041 |
| MATT | MATERIAL | BAND STEEL |
| MATT | MATERIAL | NUT STEEL COMP 1008 OR STEEL COMP 1018 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BOLT ASSN STD SINGLE MATERIAL RESPONSE CO- 1033 OR CO- 1034 OR CO- 1039 OR CO- 1041 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | BAND ALUMINUM |
| SFTT | SURFACE TREATMENT | NUT ZINC OR CADMIUM OR PHOSPHATE |
| SFTT | SURFACE TREATMENT | BOLT ZINC OR CADMIUM OR PHOSPHATE |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 010669676. An older drawing citing one of those numbers resolves here.