NSN 5340-01-157-0957 · NIIN 011570957 · FSC 5340
NO DASHES 5340011570957
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND FUEL RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 1.015 AND INCHES MAXIMUM 1.045 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.248 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.110 AND INCHES MAXIMUM 1.140 |
| MATT | MATERIAL | CUSHION RUBBER FLUOROSILICONE CLASS FQ |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MIL SPEC SINGLE MATERIAL RESPONSE -IL-R-25988 TYE 2 CLASS 1 GRADE 60 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6721 |
| STYL | STYLE DESIGNATOR |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21919WCJ18 | 1T589 |
| MS21919WCJ18 | 6T589 |
| AS21919WCJ18 | 81343 |
| MS21919WCJ18 | 81343 |
| MS21105-18 | 96906 |
| MS21919WCJ18 | 96906 |
| AS21919WCJ18 | 0U583 |
| SAE-AS21919 | 0U583 |
Supersedes
This item replaces cancelled NIIN 009658433. An older drawing citing one of those numbers resolves here.