NSN 5340-01-161-6234 · NIIN 011616234 · FSC 5340
NO DASHES 5340011616234
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND FUEL RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.608 AND INCHES MAXIMUM 0.638 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.811 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.423 AND INCHES MAXIMUM 0.453 |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MATT | MATERIAL | CUSHION RUBBER FLUOROSILICONE CLASS FQ |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MIL SPEC SINGLE MATERIAL RESPONSE -IL-R-25988 TY 2 CL 1 GR 60 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21919WCJ7 | 2Y159 |
| AS21919WCJ07 | 81343 |
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| 5340PL1362176 | 9009H |
| MS21105-7 | 96906 |
| MS21919WCJ7 | 96906 |
| 10420012 | A486G |
| AS21919WCJ07 | 0U583 |
Supersedes
This item replaces cancelled NIIN 009880387. An older drawing citing one of those numbers resolves here.