NSN 5340-01-168-6365 · NIIN 011686365 · FSC 5340
NO DASHES 5340011686365
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.796 AND INCHES MAXIMUM 0.826 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.029 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.673 AND INCHES MAXIMUM 0.703 |
| FEAT | SPECIAL FEATURES | CUSHION COLOR WHITE |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MATT | MATERIAL | BAND STEEL COMP 302 OR STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5059 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5510 |
| STYL | STYLE DESIGNATOR |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS21919WCH11 | 81343 |
| MS21919DH11 | 96906 |
| MS21919WCH11 | 96906 |
| MS21919WDH11 | 96906 |
| MS21919WCH11 | FB459 |
| AS21919WCH11 | A0126 |
| 10493784 | A486G |
| AS21919WCH11 | 0U583 |
| SAE-AS21919 | 0U583 |
Supersedes
This item replaces cancelled NIINs 005980145 · 008061320 · 010702347. An older drawing citing one of those numbers resolves here.