NSN 5340-01-169-3006 · NIIN 011693006 · FSC 5340
NO DASHES 5340011693006
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.827 AND INCHES MAXIMUM 0.857 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.060 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.735 AND INCHES MAXIMUM 0.765 |
| FEAT | SPECIAL FEATURES | CUSHION OZONE RESISTANT |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC33WH12BB | 22175 |
| MS21104C12 | 31442 |
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| 127-0657-011 | 94756 |
| MS21919CG12 | 96906 |
| MS21104C12 | 96906 |
| MS21919WCG12 | 96906 |
| MS21919-WCG12 | D9182 |
Supersedes
This item replaces cancelled NIIN 014621472. An older drawing citing one of those numbers resolves here.