NSN 5340-01-171-6693 · NIIN 011716693 · FSC 5340
NO DASHES 5340011716693
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.375 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.545 AND INCHES MAXIMUM 0.575 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.748 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.298 AND INCHES MAXIMUM 0.328 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS21919WCG05 | 81343 |
| MS21919WCG5 | 96906 |
| 10112868 | A486G |
| MS21919-WCG5 | D9182 |
| AS21919WCG05 | 0U583 |
| SAE-AS21919 | 0U583 |