NSN 5340-01-179-5450 · NIIN 011795450 · FSC 5340
NO DASHES 5340011795450
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.027 AND INCHES MAXIMUM 0.037 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.529 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.747 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| MATT | MATERIAL | BAND STEEL COMP 321 OR STEEL COMP 347 |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD 1ST MATERIAL RESPONSE A-S5510 OR ASSN STD 2ND MATERIAL RESPONSE A-S5512 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MFR REF SINGLE MATERIAL RESPONSE D6-54312-1 FSC- 57779 |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS SPECIFICATION 81205-BACC10GE |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC13WH4R | 22175 |
| BACC10GE4C | 82918 |
| TA12C32WH-4 | 84971 |
| 509SS4 | 83930 |
| S714WSSH4 | 18076 |
| S369WSSH4 | 18076 |