NSN 5340-01-180-7975 · NIIN 011807975 · FSC 5340
NO DASHES 5340011807975
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.880 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.000 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 0.680 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.120 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.096 AND INCHES MAXIMUM 0.101 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES NOMINAL 0.180 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.500 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.330 AND INCHES MAXIMUM 0.350 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.050 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.063 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.063 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.570 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.250 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.160 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.130 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| CWMX | FIRST LEG CUTOUT LENGTH | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.350 |
| CWMZ | FIRST LEG CUTOUT WIDTH | INCHES NOMINAL 1.160 |
| MATT | MATERIAL | STEEL COMP 302 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-S-766,COND A |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |