NSN 5340-01-186-3505 · NIIN 011863505 · FSC 5340
NO DASHES 5340011863505
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 1.562 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 2.281 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 34.344 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES NOMINAL 0.125 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES NOMINAL 0.125 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 33.500 |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHLU | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 4.000 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 1.250 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.032 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.032 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 35.000 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 31.000 |
| AHQY | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 3.000 |
| AHQZ | FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 4.000 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.625 |
| AJZU | FIRST LEG STYLE | |
| AKBU | SECOND LEG STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | FIRST LEG HAS NINE HOLES AND ONE 1.750 IN. BY 0.656 IN. NOTCHED CORNER; SECOND LEG HAS TEN HOLES; LEFT HAND DESIGN |
| MATT | MATERIAL | ALUMINUM ALLOY 3003 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 2,TE- H14 OR ASSN STD SINGLE MATERIAL RESPONSE SAE AA3003,TE- H14 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7084984 | 19207 |