NSN 5340-01-195-9014 · NIIN 011959014 · FSC 5340
NO DASHES 5340011959014
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.310 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.075 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.590 AND INCHES MAXIMUM 0.710 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.609 AND INCHES MAXIMUM 0.735 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.625 |
| MATT | MATERIAL | BAND PLASTIC POLYHEXAMETHYLENE AMIDE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE MATERIAL RESPONSE -IL---20693,CO- A,TY 1 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 620227-44 | 37695 |
| 214-1043P10 | 3B150 |
| 214-1043P10 | 49956 |
| F6NY-625-0 | 65664 |
| F6NY-625BK | 85480 |
| 909C922-6 | 83843 |
| 5/8-6 | 85480 |
| 155-8593-001 | 97871 |
| 909C922-6 | 99167 |