NSN 5340-01-199-5371 · NIIN 011995371 · FSC 5340
NO DASHES 5340011995371
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.0285 AND INCHES MAXIMUM 0.0355 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.749 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.967 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.548 AND INCHES MAXIMUM 0.578 |
| MATT | MATERIAL | BAND STEEL |
| MATT | MATERIAL | CUSHION RUBBER SYNTHETIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3215 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE AST- A109 |
| SFTT | SURFACE TREATMENT | BAND CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 1,CL 2 |
| STYL | STYLE DESIGNATOR |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| 5340PL0574515 | 9009H |
| MS21919WF9 | 96906 |
| MS21919F9 | 96906 |
| 5340002003038 | A00AM |
| MS21919G9 | D9182 |
Supersedes
This item replaces cancelled NIIN 002003038. An older drawing citing one of those numbers resolves here.