NSN 5340-01-216-2973 · NIIN 012162973 · FSC 5340
NO DASHES 5340012162973
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.375 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.199 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.530 AND INCHES MAXIMUM 0.550 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.718 AND INCHES MAXIMUM 0.738 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.438 |
| FEAT | SPECIAL FEATURES | TONGUE END RADIUS 0.375 IN. NOM; CUSION 0.500 IN. NOM W |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MATT | MATERIAL | BAND STEEL COMP 302 OR STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3300 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5059 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5510 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS21919CH07 | 81343 |
| 615-05-25 | 82005 |
| TA713SS7HR | 84971 |
| MS21919CH7 | 96906 |
| AS21919CH07 | 0U583 |
| SAE-AS21919 | 0U583 |