NSN 5340-01-217-0920 · NIIN 012170920 · FSC 5340
NO DASHES 5340012170920
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.031 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.652 |
| AZDA | LOOP WIDTH | INCHES MINIMUM 0.2485 AND INCHES MAXIMUM 0.2515 |
| AZDB | LOOP LENGTH | INCHES NOMINAL 0.500 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.871 |
| FEAT | SPECIAL FEATURES | NUMBER OF WIRES OR TUBES TO BE CLAMPED,2 |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MATT | MATERIAL | BAND STEEL COMP 302 OR STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5059 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5510 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3303 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR | |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1714 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1714C2-4S | 80205 |
| NAS1714 | 80205 |