NSN 5340-01-225-9670 · NIIN 012259670 · FSC 5340
NO DASHES 5340012259670
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.027 AND INCHES MAXIMUM 0.037 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.457 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.675 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.125 |
| FEAT | SPECIAL FEATURES | REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MATT | MATERIAL | BAND STEEL COMP 321 OR STEEL COMP 347 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD 1ST MATERIAL RESPONSE A-S 5510 OR ASSN STD 2ND MATERIAL RESPONSE A-S5512 |
| STYL | STYLE DESIGNATOR |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC13WH2R | 22175 |
| BACC10GE2C | 81205 |
| TA12C32WH2 | 84971 |
| 509SS2 | 83930 |
| S369WSSH2 | 18076 |
| S714WSSH2 | 18076 |
| SS369WSSH2 | 18076 |