NSN 5340-01-242-7495 · NIIN 012427495 · FSC 5340
NO DASHES 5340012427495
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.450 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.613 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 2.620 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.200 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.139 AND INCHES MAXIMUM 0.144 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 2.225 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.200 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.150 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.063 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.063 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 0.813 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 2.620 |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.063 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.300 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.310 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.690 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.100 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 90.0 |
| CWNN | SECOND LEG CUTOUT LENGTH | INCHES NOMINAL 0.550 |
| CWNX | SECOND LEG CUTOUT WIDTH | INCHES NOMINAL 1.820 |
| FEAT | SPECIAL FEATURES | SECOND LEG HAS ALL CORNERS CHAMFERED 45.0 DEG,0.120 IN. |
| MATT | MATERIAL | ALUMINUM ALLOY 5052 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 8,TE-ER H34 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541,CL 1A |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8502289 | 07187 |