NSN 5340-01-248-8428 · NIIN 012488428 · FSC 5340
NO DASHES 5340012488428
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.750 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.750 |
| AHLF | SECOND LEG WIDTH | INCHES MINIMUM 0.980 AND INCHES MAXIMUM 1.020 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.263 AND INCHES MAXIMUM 0.266 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.129 AND INCHES MAXIMUM 0.134 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.064 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.064 |
| AHQN | FIRST LEG WIDTH | INCHES MINIMUM 0.980 AND INCHES MAXIMUM 1.020 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES MINIMUM 0.230 AND INCHES MAXIMUM 0.250 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.280 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | RIGHT HAND NUT POSITION |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 9M700-2N10RD | 59570 |
| 9M700-2N10RD | 76301 |
| 10113017 | A486G |
| 9M700-2N10RD | 04967 |