NSN 5340-01-262-0458 · NIIN 012620458 · FSC 5340
NO DASHES 5340012620458
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.274 AND INCHES MAXIMUM 0.288 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.027 AND INCHES MAXIMUM 0.037 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.514 AND INCHES MAXIMUM 0.564 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.722 AND INCHES MAXIMUM 0.792 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.350 |
| ENAC | ENVIRONMENTAL ATTRIBUTE CODE | ASBESTOS ALTERNATIVE PRODUCTS |
| MATT | MATERIAL | BAND STEEL CORROSION RESISTING |
| MATT | MATERIAL | CUSHION PLASTIC POLYTETRAFLUOROETHYLENE |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5340PL0639273 | 9009H |
| J1221G04 | 03350 |
| J1221G04 | 062W0 |
| J1221G04 | 07482 |
| J1431P04 | 07482 |
Supersedes
This item replaces cancelled NIIN 010030203. An older drawing citing one of those numbers resolves here.