NSN 5340-01-263-4375 · NIIN 012634375 · FSC 5340
NO DASHES 5340012634375
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
10 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.167 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.035 AND INCHES MAXIMUM 0.045 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.305 AND INCHES MAXIMUM 0.315 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.430 AND INCHES MAXIMUM 0.502 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.156 |
| MATT | MATERIAL | OVERALL PLASTIC POLYAMIDE NYLON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE L--410 |
| STYL | STYLE DESIGNATOR |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 16601001-001 | 24384 |
| 16601001-001 | 28009 |
| 771 | 83330 |
| 771 | 91967 |