NSN 5340-01-266-3330 · NIIN 012663330 · FSC 5340
NO DASHES 5340012663330
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.020 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.483 AND INCHES MAXIMUM 0.513 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.778 AND INCHES MAXIMUM 0.808 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.188 |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 AND ALUMINUM ALLOY 1230 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC ALL MATERIAL RESPONSES QQ-A-250 TO 5,T4 |
| STYL | STYLE DESIGNATOR |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC28WD3 | 22175 |
| ST9M588WDG3 | 22175 |
| 642AS1641-3 | 30003 |
| 3929AS1421-WDG3 | 30003 |
| ST9M588WDG3 | 76301 |
| 815WD3 | 83930 |
| 10333583 | A486G |
| S663WDG3 | 18076 |
Supersedes
This item replaces cancelled NIIN 013948838. An older drawing citing one of those numbers resolves here.