NSN 5340-01-277-6184 · NIIN 012776184 · FSC 5340
NO DASHES 5340012776184
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.198 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.027 AND INCHES MAXIMUM 0.037 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.639 AND INCHES MAXIMUM 0.689 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.847 AND INCHES MAXIMUM 0.917 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.600 |
| ENAC | ENVIRONMENTAL ATTRIBUTE CODE | ASBESTOS ALTERNATIVE PRODUCTS |
| MATT | MATERIAL | CUSHION PLASTIC TETRAFLUOROETHYLENE |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| STYL | STYLE DESIGNATOR |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| J1220G08 | 1CQA5 |
| 310621 | 77445 |
| 457SS8PB | 83930 |
| 5340PL0886151 | 9009H |
| R355P08B | 99207 |
| JP0022SH07 | 99207 |
| JP0022SH07 | D9182 |
| 6749387-07 | D9182 |
| J1220G08 | 07482 |
Supersedes
This item replaces cancelled NIINs 001343824 · 005318071 · 008815026. An older drawing citing one of those numbers resolves here.