NSN 5340-01-282-5711 · NIIN 012825711 · FSC 5340
NO DASHES 5340012825711
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.213 AND INCHES MAXIMUM 0.223 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.028 AND INCHES MAXIMUM 0.036 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.749 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.967 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.678 AND INCHES MAXIMUM 0.698 |
| MATT | MATERIAL | OVERALL STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AS5587C11 | 81343 |
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| AN742F11 | 88044 |
| MS21103-11 | 96906 |
| AS5587C11 | 0U583 |