NSN 5340-01-283-2486 · NIIN 012832486 · FSC 5340
NO DASHES 5340012832486
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.194 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.034 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.726 AND INCHES MAXIMUM 0.756 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 0.944 AND INCHES MAXIMUM 0.974 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.562 |
| MATT | MATERIAL | CUSHION RUBBER BUTADIENE NITRILE |
| MATT | MATERIAL | BAND STEEL COMP 631 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-25043 17-7H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MIL SPEC SINGLE MATERIAL RESPONSE -IL-C-85052 TO 1 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SS7563-9NBC | 22175 |
| SS7563-9NBC | 78286 |
| 058527-02 | 89305 |
| SS7563-9NBC | 83930 |
| SS7563-9NBC | 84971 |
| SS7563-9NBC | 18076 |