NSN 5340-01-283-5900 · NIIN 012835900 · FSC 5340
NO DASHES 5340012835900
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 2.500 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 2.500 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 69.000 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.192 AND INCHES MAXIMUM 0.196 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES MINIMUM 7.235 AND INCHES MAXIMUM 7.265 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.620 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 1.280 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.156 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.156 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 6.190 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 69.000 |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.156 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 69.000 |
| AJZU | FIRST LEG STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | FIRST LEG TWO MTG HOLES 0.192 IN. MIN 0.196 IN. MAX DIA AND FOUR MTG HOLES 0.264 IN. MIN 0.269 IN. MAX DIA; CENTER LEG EIGHT MTG HOLES 0.264 IN. MIN 0.269 IN. MAX DIA,TWO MTG HOLES 0.065 IN. MIN 0.071 IN. MAX DIA,THREE MTG HOLES 0.280 IN. MIN 0.287 IN. MAX DIA; BEND RADIUS 0.650 IN.; STENCIL LEGEND READS HANDBOOK INSIDE W/ARROW POINTER |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5-T3 |
| SFTT | SURFACE TREATMENT | PAINT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MFR REF SINGLE TREATMENT RESPONSE ALS -6,01413 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 102062-3 | 01413 |