NSN 5340-01-326-5028 · NIIN 013265028 · FSC 5340
NO DASHES 5340013265028
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 2.250 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 2.880 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 2.880 |
| AHLL | FIRST LEG SLOT LENGTH | INCHES NOMINAL 0.750 |
| AHLM | FIRST LEG SLOT WIDTH | INCHES MINIMUM 0.405 AND INCHES MAXIMUM 0.460 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.318 |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.600 |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.800 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 1.500 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.450 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.250 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.250 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 4.880 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 1.000 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 1.250 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | SECOND HOLE SECOND LEG 0.440 IN. MIN,0.505 IN. MAX DIA |
| MATT | MATERIAL | STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 |
| STYL | STYLE DESIGNATOR |