NSN 5340-01-329-7134 · NIIN 013297134 · FSC 5340
NO DASHES 5340013297134
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.608 AND INCHES MAXIMUM 0.638 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.918 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.423 AND INCHES MAXIMUM 0.453 |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MATT | MATERIAL | BAND STEEL COMP 321 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC33WH7HW | 22175 |
| 09A067WH07HR | 1W025 |
| 09A067WH07HR | 76823 |
| 815WSS7HW | 83930 |
| TA025035WHO07HR | 84971 |
| 815WSS7HT | 83930 |