NSN 5340-01-329-9862 · NIIN 013299862 · FSC 5340
NO DASHES 5340013299862
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.032 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.639 AND INCHES MAXIMUM 0.669 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.949 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.515 |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | CUSHION RUBBER SILICONE CLASS Q |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 4,T42 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3303 |
| SFTT | SURFACE TREATMENT | BAND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541,CL 1A |
| STYL | STYLE DESIGNATOR |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 09A067WD08HR | 1W025 |
| JM44LC33WD8HW | 22175 |
| 9NG0012D8HR | 78022 |
| 09A067WD08HR | 76823 |
| 9NG0012D8HR | 78JW8 |
| 815WD8HW | 83930 |
| TA025035WDC08HR | 84971 |
| 815WD8HT | 83930 |
Supersedes
This item replaces cancelled NIIN 016786306. An older drawing citing one of those numbers resolves here.