NSN 5340-01-340-8742 · NIIN 013408742 · FSC 5340
NO DASHES 5340013408742
In Stock
CLAMP,BLOCK
Hardware, Commercial
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.240 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.620 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.880 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.201 |
| ABTJ | MOUNTING HOLE QUANTITY | 3 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | INCHES NOMINAL 0.440 |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | INCHES NOMINAL 1.000 |
| AXPE | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | INCHES NOMINAL 1.850 |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE(S) |
| BYGG | BLOCK HEIGHT | INCHES NOMINAL 0.310 |
| CWTD | CLAMPING HOLE QUANTITY | 2 |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | INCHES NOMINAL 0.200 |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | INCHES NOMINAL 0.620 |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | INCHES NOMINAL 1.000 |
| MATT | MATERIAL | PLASTIC EPOXY |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7-211660021-5 | 48T42 |
| 7-211660021-5 | 6K404 |
| 7-211660021-5 | 8V613 |
| 7-211660021 | 02731 |
| 7-211660021-5 | 02731 |
Supersedes
This item replaces cancelled NIIN 011646727. An older drawing citing one of those numbers resolves here.