NSN 5340-01-348-8622 · NIIN 013488622 · FSC 5340
NO DASHES 5340013488622
In Stock
CLAMP,BLOCK
Hardware, Commercial
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.250 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.380 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.322 |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | INCHES NOMINAL 0.250 |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | INCHES NOMINAL 3.630 |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE(S) |
| BYGG | BLOCK HEIGHT | INCHES NOMINAL 0.690 |
| CWTD | CLAMPING HOLE QUANTITY | 3 |
| CWWM | CLAMPING HOLE DIAMETER | SECOND HOLE INCHES NOMINAL 0.875 |
| CWWM | CLAMPING HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.375 |
| CWWM | CLAMPING HOLE DIAMETER | THIRD HOLE INCHES NOMINAL 0.875 |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | INCHES NOMINAL 0.310 |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | INCHES NOMINAL 1.000 |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | INCHES NOMINAL 1.380 |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | INCHES NOMINAL 2.500 |
| FEAT | SPECIAL FEATURES | INCL 2 SPACER SLEEVES AND 1 CHANNEL |
| MATT | MATERIAL | RUBBER BUTADIENE NITRILE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-C-85052 OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-C-85449 |
| STYL | STYLE DESIGNATOR |