NSN 5340-01-352-6404 · NIIN 013526404 · FSC 5340
NO DASHES 5340013526404
In Stock
COVER,ACCESS
Hardware, Commercial
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.168 AND INCHES MAXIMUM 0.182 |
| ABGL | WIDTH | INCHES MINIMUM 7.825 AND INCHES MAXIMUM 7.885 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.090 |
| ABRY | LENGTH | INCHES MINIMUM 11.040 AND INCHES MAXIMUM 11.100 |
| ADNU | CORNER RADIUS | INCHES NOMINAL 0.875 |
| ADNV | HOLE QUANTITY ALONG LENGTH | 22 |
| ADNW | HOLE QUANTITY ALONG WIDTH | 15 |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES NOMINAL 1.000 |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | INCHES NOMINAL 0.946 |
| ADPC | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH | INCHES NOMINAL 0.367 |
| ADPD | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH | INCHES NOMINAL 1.153 |
| ADPN | FIRST RECESS INSIDE HEIGHT | INCHES MINIMUM 0.396 AND INCHES MAXIMUM 0.416 |
| ADQB | SECURING DEVICE TYPE | SPECIAL |
| ADQK | MOUNTING OPENING SHAPE STYLE | |
| FEAT | SPECIAL FEATURES | 7 ADDITIONAL HOLES IN MIDDLE SECTION; SILICONE SPONGE RUBBER TAPE ON UNDESIDE-2 PLACES |
| MATT | MATERIAL | ALUMINUM ALLOY 356.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE A-S4218 |
| SFTT | SURFACE TREATMENT | PAINT POLYURETHANE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-83286 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 755308 | 99167 |