NSN 5340-01-353-9056 · NIIN 013539056 · FSC 5340
NO DASHES 5340013539056
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.064 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 1.406 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.701 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.798 AND INCHES MAXIMUM 1.828 |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,T4 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC33WD29 | 22175 |
| ST9M630D29 | 22175 |
| ST9M630D29 | 76301 |
| 830WD29G | 83930 |
| 10113207 | A486G |
| 5340-041WD29 | S7549 |