NSN 5340-01-361-7365 · NIIN 013617365 · FSC 5340
NO DASHES 5340013617365
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.064 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 1.156 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.451 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 1.313 |
| FEAT | SPECIAL FEATURES | WITH WEDGE |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | CUSHION RUBBER BUTADIENE NITRILE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 |
| SFTT | SURFACE TREATMENT | BAND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| JM44LC33WD23YN | 22175 |
| JM44LC33WD23NL | 22175 |
| JM44LC33WD21NL | 22175 |
| 09A067WD23AF | 76823 |
| 09A0672D23NB | 76823 |
| 09A067WD21NB | 76823 |
| 815WD21NL | 83930 |
| TA025035WDC21NL | 84971 |
| 09A067WD21NB | 84971 |
| 830WD23AF | 83930 |
| TA025035WDC23NL | 84971 |
| 830WD23NL | 83930 |
| TA025035WDC23NB | 84971 |
Supersedes
This item replaces cancelled NIIN 013536229. An older drawing citing one of those numbers resolves here.