NSN 5340-01-370-9837 · NIIN 013709837 · FSC 5340
NO DASHES 5340013709837
In Stock
CLAMP,LOOP
Hardware, Commercial
Application: F100PW0229 ENGINE
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.040 |
| AGAV | END ITEM IDENTIFICATION | F100PW0229 ENGINE |
| AXWJ | FASTENING DEVICE TYPE | SPRING TENSION |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.836 |
| AZDA | LOOP WIDTH | INCHES NOMINAL 0.625 |
| FEAT | SPECIAL FEATURES | TWO LOOPS OF DIFFERENT SIZES WITHCUSHIONS AND HINGES;SIZE OF FIRST LOOPGIVEN ABOVE.SECOND LOOP 0.250 IN. I.D.AND 0.711 IN. CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE;WASHER INCLUDED |
| MATT | MATERIAL | CUSHION RUBBER FLUOROSILICONE CLASS FQ OR RUBBER SILICONE CLASS Q |
| MATT | MATERIAL | SCREW STEEL |
| MATT | MATERIAL | BAND STEEL CORROSION RESISTING |
| MATT | MATERIAL | NUT STEEL COMP 316 |
| MATT | MATERIAL | PIN/STUD STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION MFR REF SINGLE MATERIAL RESPONSE WA 36081,CAGEC 77445 OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-C-85052 TO 3 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | PIN/STUD ASSN STD SINGLE MATERIAL RESPONSE A-S 5513 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD SINGLE MATERIAL RESPONSE A-S 5510 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SCREW ASSN STD SINGLE MATERIAL RESPONSE A-S 5525 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT ASSN STD SINGLE MATERIAL RESPONSE AST- B-525 |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST2818-0410 | 52661 |
| ST2818-0410 | 77445 |
| TA14300004-0410 | 84971 |
| 5340PL1675507 | 9009H |
| 5340PL0803968 | 9009H |