NSN 5340-01-374-7163 · NIIN 013747163 · FSC 5340
NO DASHES 5340013747163
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | THREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | OZONE RESISTANT |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.070 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.862 AND INCHES MAXIMUM 0.892 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.095 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.798 AND INCHES MAXIMUM 0.828 |
| FEAT | SPECIAL FEATURES | "W" INDICATES WEDGE TYPE CUSHION,WEDGE SHALL BE INTEGRALLY MOLED TO CUSHION OR VULCANIZED USING PRESSURE AND HEAT TO ACCOMPLISH A BOND BETWEEN CUSHION AND WEDGE |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MATT | MATERIAL | CUSHION RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5 |
| SFTT | SURFACE TREATMENT | BAND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541,CL A |
| STYL | STYLE DESIGNATOR |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-C-8603 | 81349 |
| MIL-DTL-8603 | 81349 |
| 5340PL0849534 | 9009H |
| MS21919WDE13 | 96906 |
| MS21919DE13 | 96906 |
Supersedes
This item replaces cancelled NIIN 014142922. An older drawing citing one of those numbers resolves here.