NSN 5340-01-406-8984 · NIIN 014068984 · FSC 5340
NO DASHES 5340014068984
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
11 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.199 AND INCHES MAXIMUM 0.209 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.056 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES MINIMUM 0.722 AND INCHES MAXIMUM 0.782 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 0.970 |
| BZTN | LOOP INSIDE DIAMETER | INCHES NOMINAL 0.562 |
| ENAC | ENVIRONMENTAL ATTRIBUTE CODE | ASBESTOS ALTERNATIVE PRODUCTS |
| MATT | MATERIAL | BAND STEEL COMP 321 OR STEEL COMP 347 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND ASSN STD 1ST MATERIAL RESPONSE A-S 5510 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5512 |
| STYL | STYLE DESIGNATOR |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACC10HS09 | 22175 |
| BACC10HS09 NON-ASBESTOS | 81205 |
| TA025029-09 NON-ASBESTOS | 84971 |
| BACC10HS09 | 84971 |
| BACC10HS09 | 83930 |
| 490-09RPB NON-ASBESTOS | 83930 |
| S500-9 | 18076 |
| BACC10HS09 | 18076 |
Supersedes
This item replaces cancelled NIIN 010732800. An older drawing citing one of those numbers resolves here.